Quantcast
Channel: SCN: Message List
Viewing all 8798 articles
Browse latest View live

Re: Horizontal Axis X doesn't cross at $0

0
0

Hi Alex,

 

Try changing your scale in the 'Behavior > Scale' tab to "Manual" scaling. You will need 2 formulas for the min/max.

 

A = rounddown(min([range of all values]),-4)

B = roundup(max([range of all values]),-4)

 

These will give you your lowest and highest values being plotted, and round down or up to the nearest 10,000.

 

In the Divisions section below that, bind "Size of Division" to the following formula:

(B - A) / 4

 

Then in 'Appearance > Axis' tab change show only major grid lines, and change them to be the same color/size as your horizontal axis. You should get something similar to the attached result. Slightly different than what you're looking for, but the closest you'll get without custom graphics/layering multiple charts.

X_0.PNG


Re: HTTP response contains unexpected content-type (100.101)

Re: .PFL files accumulating in Temp directory of SAPService

0
0

Hi Deepak, I checked windows services (sorry I had not understood what I wanted to say) "services.msc" and I have not found any "ERS" service is clear to me that I can not delete all the files, but if stored in another directory or disk in case something went wrong or needed them, thank you very much for your great help, but can I do so that more files are not generated. PFL

 

 

 

 

I attached image with the services initiated by E.Captura.PNG

Re: Trouble Passing URL Parameters between Applications

0
0

Hi Norm,

 

I was referring to the ampersand and parameter name, as is now shown in your updated code, so the problem must lie elsewhere.  I'll give it some further thought.  One other option to try would be to pass the internal variable values instead of the external ones.

 

Regards,

 

Mustafa.

Re: Nota 1975152

0
0

Estamos teniendo issue al aplicar la nota 1975152 en la parte de la modificación de la interface IF_HRPAYMX_CFDI. Cuando tratamos de aplicar el punto 16.4 (crear el Tipo LTY_T_WT_RANGE y vamos a la cuarta columna, no tenemos opción de editar el código para actualizarlo como sugiere la nota).


Alquien tiene el mismo issue?. COmo han resuelto.

Solman_setup SPS10

0
0

Helllo everyone,

 

I'm going through Solman_setup "Basis Configuration"Setp 5 "Configure Automatically". In step "Activate BW content for 
RCA" my jobs got cancelled with error: BI_NOT_READY(Abap cause=/<SID>CLNT100/LS//RSSEND////nullnullnull)

I entered transaction RSA1 and a pop up appeared with the following options: "replicate metadata", "activate only" or "cancel" and I pressed "Cancel"

According to this post I should have pressed "activate only" (I found this post later):

 

Solman 7.1 Basic Configuration error in Step 5 "Configure Automatically"

 

Now everytime I entered transactoin code RSA1 I'm not gettin the pop up. Is this a problem? then, I run again the "Activate BW content for 
RCA" and the job start running (CCMS_BI_SETUP) - not failling anymore.

 

The SAP information also says the following:

 

"Make sure the BW activation was finished succesfully before activating any content. this can be done

using transaction RSTCO_ADMIN in the BW client"

 

In which activity was this step performed or should have been performed?, When I entered RSTCO_ADMIN I got a yellow status.

 

So now I got the following:

 

RSTCO_ADMIN (yellow status) -> RSA1 (cancel option)- > CCMS_BI_SETUP (running)

 

Any advices?

 

Regards,

 

JAM

Re: How to split cost of G/L account to several cost receivers (WBS,G/L etc.)

0
0

Hi Annika W,

I got you. If you have no other use for these accounts, you can do that. But I suggest you implementing the note 483340, so you can maintain any additional account assignment.

 

Regards,

Ian.

Re: Delivery date not confirmed on the same day even though stock available

0
0

Check any pick/pack time and loading time are maintained at the shipping point of plant 3004.

Regards,


Re: Horizontal Axis X doesn't cross at $0

0
0

Jeremy,

 

I tried this approach but unfortunately it doesn't work with my real numbers. what multiple layering approach you mentioned?

Re: Solman_setup SPS10

Disable IOS Update using Afaria

0
0

Hi all, Is it possible to disable IOS update using Afaria?

Re: BO SIA not appearing after Modified the installation

0
0

I recently encountered a similar problem with the error message "The Crystal enterprise.null plug in does not exist in CMS (FWM 02017).

 

this was on a 3.1 system.  I could never find an explanation for the message or a solution.  Eventually I gave up and did a complete uninstall and reinstall on that server.

Re: Problems with SP03, anyone?

0
0

Yes, I am familiar with the compare and merge options for resource files.  But one has to be selective about one merges, because all customizations could be wiped out.  And, yes, I have looked in the readme file and, while it tells what XDB files have been updated, it doesn't tell me what has been added, deleted, or changed.  Even SAP PD support doesn't know what has been changed.  They tell me they have sent a request to have XDB modifications detailed in the release notes.

Re: Charge calculation issue

0
0

Hi Vijay,

 

Just try follow these  General steps:

 

1. Include direct charge in calculation sheet. if still it is not picked, it means you have a calculation sheet issue. then check settings in Calculation sheet.

2. If yes, the problem is rate table.

 

Very Generic and Starting Settings required for Charge Calculation are:

1. Create a charge type.

2. Create FA, Calculation sheet, Rate table and Scales.

3. Create BP and Org. Data

4. Define General Settings and Calculation profile.

 

Hope it helps.

 

Regards

Nitesh

Re: Problems with SP03, anyone?

0
0

George,

 

I get lots of these, too.  I send them to PD support, but they never seem to be able to tell me what they are doing about them or what I could do to avoid them.  They ask me what they need to do to reproduce them, but they are called "Unexpected" for a reason and they happen randomly.

 

Ted


Re: Service Level in OTR not getting updated

0
0

Hi,

 

Kindly also maintain Service level codes under SPRO ->Forwarding Order MAnagement-> Define transportation service level codes.

 

Hope it helps.

 

Regards

Nitesh

Only some users facing issue that "One or more mandatory variables of query XXX not filled"

0
0

Hi XCelsius Guru,

 

We have a dashboard in XCelsius that is based in multiple BW Query. This BW Query has one a variable which is not mandatory but initialized. I did the connection the bw query with xcelsius and everything was fine, but for few users when they try to execute the dashboard with the url link if gives the below error meaasge.

 

"One or more mandatory variables of query XXXXXX not filled"

 

For this user everything was working fine few days back but is showing error now but no authorization has been changed.

 

Regards,

Ankit

How to solve error message no. 00058 (Entry US 001 does not exist in T005E (check entry))

0
0

Hi everyone,

 

I would like some help about an error that occurs when I'm trying to define a county and city code for a plant.

The error description is described below:

 

Entry US  001 does not exist in T005E (check entry)

Message no. 00058

Diagnosis

Input values must be defined in Table T005E. The value or values 'US 001' are not specified in this table.

 

Procedure

Check whether the input is correct and correct if necessary.

Procedure for System Administration

If this is not an incorrect entry, check the system settings and change them if necessary.

If there is a connection to the Customizing system, you can maintain the system settings by choosing Customizing in the Performance Assistant or Maintain Entries (F5) when displaying the help in a modal dialog box.

 

When I go in transaction SE16 to look for all the T005E table enties, the value is in the table.

Can anyone help me with this issue?

 

The reason why I want to do this is because when I try to create a finished product, in the Sales:sales org. 1 tab, the system cannot seem to find any city sales tax codes and county sales tax codes. I figured it was because I didn't put an adress in the organizational elements (Plants, Division, Sales organization...). So when I try to go back in the organizational elements and insert the county and city code, the error message no. 00058 appears. Maybe theres another way?

 

Thank you very much for your time.

 

Mark

Re: SAP Process Integration (PI) installation doubts

Re: Error when using Universe 3.x / 4.x and Windows AD authentication

Viewing all 8798 articles
Browse latest View live




Latest Images