Hi Experts,
I'm doing Access Control for user to see each company
I got RBAM error on OWL screen as you can see pic below,
You can see 2 company 1400000 and 1000000, each user can Read and Write but why i got this error
Best Regards,
Thanarat
RBAM error message
↧
↧
Re: Epmlink doesnt work
Is there a way to put PDF files in that folder?
↧
Re: Chart
The requirement is like this:-
The graph or chart should show the staff working month wise.
The projection should be month vise if the staff is working thoughout the month then his entire month should be covered but if his entire month is not full then the month should display smaller.
The month working time should be calaculated the from start date and end date.
↧
Re: Issue with cash flow status for follow up postings
Hi Seetha,
Have tried the force regeneration of cash flow using RECDCGOL and used the "flag as posted" in Use First-Posting-From Date field. After execution, generated follow up posts were no longer appearing in cash flow and the "entry marked as posted" where already for the new business partner.
Best Regards,
Ferdie
↧
How can I get the language of user login?
Hi experts,
How can I get the language of user login? Because I extension BO, the [Label] not the same in chinese or in english.
Thanks.
↧
↧
Re: Infocube and Query output mismatch
Hi Rathi,
please check your report settings/filters/restrictions.
in columns, have you put amount and quantity?
check their properties, if you selected eliminate null values then your report will shows on 1000 amount.
Thanks
↧
TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Hi Guys,
Need a bit of help on TSV_TNEW_BLOCKS_NO_ROLL_MEMORY dump issue. Tried a lot of things however still having this issue. So, trying to find some idea how can I proceed further. Any suggestions are welcome.
Just for some background.
BW SAP NETWEAVER 7.4
Oracle 11.2.0.4
I'm getting the ST22 dump while import a transport which similar to SAP note 1842962. However, the weird it manage to be imported in one of the system and failed at the other one.
Based on 7.4 release, all the roll memory parameters are deleted and obselete - Link
Below are the ST22 Dumps:
Short Text
No roll storage space of length 25249840 available for internal storage.
table blocks.
Error analysis
The internal table
"\FUNCTION-POOL=RSDU_PART_ORA\FORM=WRITE_PART_DDSTORAGE_ODSO_TAB\DATA=L_T_STOR
PAR" could not be enlarged further.
Memory location: "Session memory"
You attempted to extend the data structure for the management of the
memory blocks for table
"\FUNCTION-POOL=RSDU_PART_ORA\FORM=WRITE_PART_DDSTORAGE_ODSO_TAB\DATA=L_T_STOR
PAR". However, the 25249840 bytes required for
this were no longer available in the specified memory area.
The amount of memory requested is no longer available.
How to correct the error
Perform an analysis to find out whether this request makes sense or
whether a program error has occurred. Pay particular attention to the
internal table entries listed below.
The amount of memory (in bytes) used at termination time was:
Roll area...................... 0
Extended memory (EM) 0
Assigned memory (HEAP) 27667312
Short area.....................
Paging area.................... 81920
Maximum address space.......... 18446741284279287808
If the error occurs in a non-modfied SAP program, you might be able to
find a solution in the SAP Notes system. If you have access to the SAP
Notes system, check there first using the following keywords:
"TSV_TNEW_BLOCKS_NO_ROLL_MEMORY"
"SAPLRSDU_PART_ORA" bzw. LRSDU_PART_ORAF02
"WRITE_PART_DDSTORAGE_ODSO_TAB"
If you cannot solve the problem yourself, please send the following
information to SAP:
System environment
SAP Release..... 740
SAP Basis level 0012
Application server... sapxxx
Network address......
Operating system... SunOS
Release.............. 5.10
Hardware type....... i86pc
Character length..... 16 Bits
Pointer length........ 64 Bits
Work process number... 35
Shortdump setting. full
Database server...
Database type..... ORACLE
Database name.....
Database user ID
Terminal..........
Character set C
SAP kernel....... 742
Created on....... Jun 29 2015 22:52:27
Created at....... SunOS 5.10 Generic_147441-01 i86pc
Database version OCI_112, 11.2.0.4.0, V1, default
Patch level....... 200
Patch text.......
Database............. ORACLE 11.2.*.*.*, ORACLE 12.*.*.*.*
SAP database version. 742
Operating system... SunOS 5.10, SunOS 5.11
Memory consumption
Roll.... 0
EM...... 0
Heap.... 27667312
Page.... 81920
MM used. 13707064
MM free. 8126744
↧
Re: BEX Date Variable to Pass values to multiple date characterstics
Hi Loed,
Thank you for the response. I Need to apply Date interval filter on same Key figure . I have create two selection (A,B) with same key figure. A is restricted for startdate range and B is restricted for create date range. I am doing this to have data for Startdate range or create date range. I am getting the data as I needed but just that I am seeing two prompts but I need to see only one.
Thanks,
Raja
↧
Want to start my career in SAP ABAP
Hi,
I am an MBA graduate from alliance university & very interested in going to the technical field, As SAP is in boom, I was thinking of joining for the online course from erptac.com or mnptechnologies.com . But they are suggesting me to go fiori as this is better than ABAP. Can you please help me out in finding the right path.
↧
↧
Re: Number ranges
Hello Pramod,
- See one such pop-up with message here, I get during the use of few enhancements which I work with. "Carry out repairs in non-original system only if they are urgent". It looks similar and is not critical.
- However, you should contact your BASIS (Security) team and get clearance, as the Help (?) Procedure below suggests in your case.
---------------------------------------------------------------------------------------------------------------
Diagnosis
The object being edited is in a namespace reserved for objects belonging to SAP or another software producer. This system is supplied with this namespace.
System Response
The function continues.
Procedure
Only perform urgent repairs and only after consulting with or on instruction from the owner of the namespace.
--------------------------------------------------------------------------------------------------------------
Good luck
KJogeswaraRao
↧
Re: Error during re-defining Organization Structure
Hi Kim,
I guess there is some data mismatch. Initially I also faced the same issue.
What details are you trying to modify in Org structure? Please try correcting the fields as given in the error message.
Thanks
Abdul Rasheed
↧
SAP ByD | Customer Invoice - Input price amount and vat amount directly without calculation from ByD
Dear All.
Is it possible to input pricing amount and vat amount directly with no system calculation ?
My situation have many external system that generate customer invoice and VAT amount will be calculated by external system.
Then I using web service of ByD to interface all external Customer Invoice come into ByD system for doing payment activity.
Because, ByD re-calculate vat , that cause decimal rounding problem. (It is not equal to source system)
Currently, We have 2 options.
1. PPSTD1 Standard Procedure - Let end-user input base amount and system will calculate for tax amount.
2. PPGP02 Standard Gross Procedure - Let end-user input total amount (base amount + vat amount) and system will calculate for base amount.
Actually, VAT amount will be calculated before interfacing to SAP ByD. Then I don't need any calculation from ByD system.
Thank you in advance
Best Regards,
Krit R.
↧
Re: How to implement suggestions on sap.m.Input using xml model ?
I had tried this before, it will not work , because I am using an xml model. I had also referred the documentation which had the syntax for binding using xml model. The syntax you have provided is the one using a JSON model.
↧
↧
Re: okb9 change log
Hi
This has happened during transport from quality to production. Can i check the list of gl which were included in OKB9
Regards
Anuradha
↧
Re: Error in upgrade sybase from 15.7 to 16 sp01
Hi,
This should help you here..
2228120 - BS/BW on ASE: How to reset sapsa password
Regards
Prithviraj.
↧
Re: invoice refrence field
Hi Gabriel ,
Thanks for prompt reply
Actually this notes was helpful
My issue is : Invoice in interface is showing invoice ref No and in SAP its showing "V" . both notes was checked by ABAP team and cant see that same is implemented . can you add more to it how can i find out "Why V is getting displayed and not actual invoice ref no:"
↧
Re: Error during re-defining Organization Structure
Hi Abdul,
I modified the existing organization structure. Now if I try to re-create a deleted unit, I am getting the following error:
And when I try to assign an employee in the existing unit, I got the following error:
Please suggest.
Regards
↧
↧
Re: Absences days Problem ?
Hi Rabi,
Thank you for responding to my scenario
I booked a leave on Friday to Monday Absence days=2
That is the Problem, earlier i am changed to counting rule also. but not success this scenario.
↧
Re: ESS link showing blank screen in IE11
Hi Sudheer
As given earlier the PAM link, kindly refer to it, it acts as the first document that needs to be referred to check if the portal is at the supported version as per the browser or not ?
If not, workarounds might work for you, but from SAP side the first recommendation would be to update your portal to a supported SP as per the browser requirement.
Regards
Santarshi Samanta
Follow Santarshi Samanta
↧
Re: Inspection lot status UD ICCO SPST without doing UD-BAPI_INSPLOT_SETUSAGEDECISION
Thanks Arijit
I have already raised the issue with SAP , but they are asking live test data in Quality client which is quite difficult to provide as this issue comes surprisingly . That is you don't know which lots of which material are going to be affected.
Anyway, i am sending some data to SAP and at the same time need few pieces of advice from other experts.
Regards
DD
↧
More Pages to Explore .....
