Hi Andr,
I too required to load different view as default view in viewset at runtime.
I have followed the same way as you suggested but view is not loading, still is display the same old view.
Please suggest.
Thanks,
Raj
Re: Displaying different views in a viewset area
↧
↧
Re: FICO - FV60 PREM Search Help
This is modifiable with access key.
↧
Re: Document type '' not defined Message no. 26168
The issue is solved.
Thanks a lot Nayeemur Rahman!
↧
Re: Profit and Loss with External Code
Hi Harshal,
does it require a special setup or I just choose 'external code' in P&L?
Thanks,
Vangelis
↧
Re: FICO - FV60 PREM Search Help
Hi, in standard there is no search help in FV60 / FB50 for PERNR.
a) what object(s) has been modified to activate search help for FB50?
b) both transactions use structure ACGL_ITEM. In structure ACGL_ITEM is there a search help assigned to PERNR?
↧
↧
Getting Started with Screen Personas.
Hi Sap Techies,
Although OpenSap Course elaborates all the necessary info, can you help me get started with SAP Screen Personas..
Since going through the OpenSap SAP Screen Personas course I figured out that to get the Functionality we need to have an Add-on onto theserver in order to attend the features of it.
Please light my path for activating screen personas.
Thanks,
--Pavan G
↧
Test Equipment Calibration : Need to record master value also
Dear Sir,
During the result recording for Test Equipment Calibration , We need to record the value measured by the equipment as well as the value measured by master equipment .
To illustrate the case , We have a voltmeter equipment for which calibration is being done . During the process , voltage measured by this equipment is 12.03 volt and voltage measured by master voltmeter is 12.06 volt . During Result-Recording of the calibration process , We need to record both the values .
But in the standard SAP system , We are able to record only the one value i.e 12.03 volt .
I request members to kindly guide me , as what steps need to followed to address the above requirement please .
Rgds
B Mittal
↧
Re: Drilldown function from ALV list
Hi,
This is nice, can we use this for internal tables ?
Regards.
↧
Re: Calculatin View Aggregation node acting Weird way...
HiGurus,
Even i am getting the same issue, i have 5 joins in my calculation view.at the Join_5 iam getting proper data.But,when iam going to Aggregation the data is not proper.
Thanks in Advance!!!!
↧
↧
Re: How to write Dynamic Function Module
Swet posted a link farm. It's been rejected. But it's a good demonstration why link farms are often useless - they don't relate to the question asked!
↧
Re: SAP FIORI Launchpad "Apps are Not loading for END_USER"
Hi there,
do you get the tiles if you execute the /n/UI2/FLC FLP check report restricted to the Cust layer and the roles assigned to the affected user?
If yes, then please make sure that notes 2230554, 2154643 and 2200279 are implemented in your system and then please recreate the page cache with reports /UI2/PAGE_CACHE_RESET and /UI2/PAGE_CACHE_CREATE. After this check if translation is working.
If the above not solves the issue, execute report /UI2/INVALIDATE_GLOBAL_CACHES
Best regards,
Janos
↧
Re: Statistical Excise condition giving Dump
in case of domestic sales where Excise condition is real, then if Excise condition is maintained as 1000%, then system does not give any Runtime error
Can you explain which condition type you maintained as 1000% and why? Logically, a percentage condition type can be 100% but not 1000% as you mentioned.
G. Lakshmipathi
↧
Which program generates SPOOL ID for PO Creation
Hi everyone,
I wish to send PO PDF through email at the time of creation after pressing save button..
I have done research on SCN but didn't got satisfactory solution.
Please guide me on this.
Thanks,
Darshan
↧
↧
How to use filter in ui5 table
Hi,
I am trying to use filter but after clicking in button event all the data are coming. It is not filtering any data..
var oModel = this.getView().getModel();
var oIn1 = this.getView().byId("in1").getValue();
var oTable = this.getView().byId("Tab2");
oTable.addColumn(new sap.ui.table.Column({
label : new sap.m.Label({ text : "MaterialNo"}),
template : new sap.m.Text({ text : "{MaterialNo}", filterProperty:aFilter }),
}
));
oTable.addColumn(new sap.ui.table.Column({
label : new sap.m.Label({ text : "SalesOrderNo" }),
template : new sap.m.Text({ text : "{SalesOrderNo}", filterProperty:aFilter }),
}
));
oTable.getBinding("rows").filter([aFilter]);
//Filter values for a certain Sales Number
var aFilter=new sap.ui.model.Filter( "SalesOrderNo", sap.ui.model.FilterOperator.Contains, oIn1) ;
oTable.bindRows({ path: "/MaterialNode", filters: [aFilter], });
}
Thanks..
↧
Re: Using OpenUI5 xml views with cdn
need small clarification when you call the control methods in XML View and .html you used "ns.controllers."
why?
Could you please remove this(ns.controllers.) and try.
sap.ui.controller("local.controller", { // Line 93
same "local.controller" is uses in XML View (controllerName="local.controller") // Line num22
↧
SP query for the OCRD and OCPR
Hi Experts,
I am using the below queries. Query 1 is working and when i update the query as like query 2 , then it is not working.
what would be the issue ?
Query 1
IF (@transaction_type = 'A'OR @transaction_type ='U') AND @object_type = '2'
BEGIN
If exists (SELECT T0.CardCode FROM OCRD T0
WHERE ((ISNUll(T0.CntctPrsn,'')='') ) AND (T0.CardCode = @list_of_cols_val_tab_del))
begin
SET @error = 110
SET @error_message = N'MUST SPECIFY ALL CONTACT InFO'
end
END
QUery 2
IF (@transaction_type = 'A'OR @transaction_type ='U') AND @object_type = '2'
BEGIN
If exists (SELECT T0.CardCode FROM OCRD T0 INNER JOIN OCPR T1 ON T0.CardCode = T1.CardCode
WHERE ((ISNUll(T0.CntctPrsn,'')='') and (ISNUll(T1.E_MailL,'')='') ) AND (T0.CardCode = @list_of_cols_val_tab_del))
begin
SET @error = 110
SET @error_message = N'MUST SPECIFY ALL CONTACT InFO'
end
END
Thanks in advance,
Regards,
Dwaraka
↧
Re: Deleting special characters from Integer data type
Ramesh,
If the issue is with display of value, copy the content of integer variable to a variable of type C (with required length) or string and use the new variable for display. The display of comma or dot or the combination of it depends on the Decimal notation set for the user (transaction SU3).
Regards,
~Athreya
↧
↧
Re: Reg: JMOD Roundoff
Dear Abhishek,
I did not maintain any routine in Pricing procedure(V/08).
Regards,
Mahen
↧
Re: Create Email template with Survey link in C4C
Hi All,
I am trying to configure satisfaction survey in C4C wherein the requirement is to send a survey via email and capturing the response for further analytics purposes.
However I am not able to figure out how to embed survey in the emails ?
Appreciate any inputs on the same.
Thanks,
Edison
↧
Re: Fiori: Fixed asset Factsheet implementation error
Additional information about our system
S/4 HANA SPS 1508
UIEAPP01 SP8 and UIX01EAP SP08
Thanks!
↧
More Pages to Explore .....
