Hi Tammy,
I've tried to used formula but then all content in the report is converted to SAP formulas. I am not able to expand or collapse the hierarchy within the report.
Hi Tammy,
I've tried to used formula but then all content in the report is converted to SAP formulas. I am not able to expand or collapse the hierarchy within the report.
Hi All.
I am using the HCP Trail account from last 6 months.
Today for some reason I reset my password .. but I have lost all programs and Settings work I did there.
Can someone help me how to get back the data ( programs and Settings).
I did lot of work there. Very difficult to start again.
Please help as how to get the work back.
Thanks,
Shreedhar
Dear Maik:
I send you the log file as you told me.
I can create one or more "SO" in the first session. If I do a log off and I try again with another session, the DI Server is stopped.
I'm not using B1WS.
I wonder if with this data you can help me. If you need more information about my problem, please, tell me.
King regards
Martín Morales
Dear Maik:
I have another question:
Is correct connect and disconnect each session to create documents using a Web service when I use the DI Server?
I read in a forum that I need create the connection each time I want to create a document.
Regards,
Martín Morales
Hi Martin,
No, it's still allowed to use 3.x data staging technology in BW release 7.4.
However, the new 7.x data staging technology was introduced already 10 years ago. It has many advantages and is superior to the old 3.x data staging technology. I really advice to not use 3.x data staging technology anymore and to migrate any existing 3.x data staging technology on a short term. I expect that it won't be supported anymore in one of the next releases.
Best regards,
Sander
Hello friends,
I am new to dataguard concept and I am facing the above issue on a system .
Please find the details below.
--------------------------------------------------------------
DGMGRL> show configuration
Configuration - SID
Protection Mode: MaxAvailability
Databases:
SID_HOST1 - Primary database
SID_HOST2 - Physical standby database
Error: ORA-16766: Redo Apply is stopped
Fast-Start Failover: DISABLED
Configuration Status:
ERROR
----------------------------------------------------------------------
DGMGRL> show database SID_STDBYHOST
Database - SID_STDBYHOST
Role: PHYSICAL STANDBY
Intended State: APPLY-ON
Transport Lag: 0 seconds (computed 0 seconds ago)
Apply Lag: 11 hours 6 minutes 15 seconds (computed 0 seconds ago)
Apply Rate: 18.35 MByte/s
Real Time Query: OFF
Instance(s): SID
Database Error(s):
ORA-16766: Redo Apply is stopped
Database Status:
ERROR
-------------------------------------------------------------------
DGMGRL> show database verbose SID_STDBYHOST
Database - SID_HOSTSTDBY
Role: PHYSICAL STANDBY
Intended State: APPLY-ON
Transport Lag: 0 seconds (computed 0 seconds ago)
Apply Lag: 11 hours 8 minutes 22 seconds (computed 0 seconds ago)
Apply Rate: 18.35 MByte/s
Real Time Query: OFF
Instance(s)
SID
Database Error(s):
ORA-16766: Redo Apply is stopped
Properties:
DGConnectIdentifier = 'sid_stdbyhost'
ObserverConnectIdentifier = ''
LogXptMode = 'SYNC'
DelayMins = '0'
Binding = 'optional'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '30'
RedoCompression = 'DISABLE'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '14'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = ''
LogFileNameConvert = ''
FastStartFailoverTarget = 'sid_primaryhost'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
ApplyLagThreshold = '0'
TransportLagThreshold = '0'
TransportDisconnectedThreshold = '30'
SidName = 'SID'
StaticConnectIdentifier = '(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=STDBYHOST)(PORT=1519))(CONNECT_DATA=(SERVICE_NAME=SID_HOST_DGMGRL)(INSTANCE_NAME=SID)(SERVER=DEDICATED)))'
StandbyArchiveLocation = '/oracle/SID/oraarch/SIDarch'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.dbf'
TopWaitEvents = '(monitor)'
Database Status:
ERROR
pLEASE FIND OTHER DETAILS in the screenshots attached.
Please help me in making thye DB's consistent.
As per this blog , I found out that
alter database recover managed standby database disconnect from session;
could help me.
Please get back to me.
Thanks and regards,
Uday.
Dear all,
As you all have the problem. I would like to provide some hint.
In action column, you may see edit or delete or both buttons. It is hard coded to determine what button is displayed in
CL_BTDOCFLO_HDRDOCFLOW_CN00
GET_OCA_T_TABLE
I do not know why you can find the delete. Per my understand, the delete button is always displayed no matter the document is in edit or display mode.
You may debug this method to find out why. Please remeber to check the view with F2 because you may have your own enhancement.
Spencer
Hi Edmund
Good question. It will not be possible for you see the effect of that check box until or unless you go a little deep.
The first thing is that you need to create a local connection:
Select a SAP BW OLE DB Provider. Provide the details as requested and finally select a SAP BW InfoCube from which you want to read data.
Once this connection is created, connect to it. Create a new report and it will take you to the report editor. At this point, that option is not selected and you see all dimension trees expanded.
On turning the option on, here is how the report editor will show up the dimensions:
Hope this answers your question.
Hi Mangesh,
Which version of HANA are you currently using?
As of SPS 08: there is only 1 xsengine on a HANA Scale out instance on the MASTER node by default
From SPS09 and above versions; xsengine is by default embedded into the Indexserver, but you can add a separate xsengine service and this will stop the embedded service to be stopped and disabled.
I am not involved with too many applications that use the xsengine so I cannot guide you much on how to handle the bottleneck for xsengine based apps
Sunil
New question, new Discussion please.
Regards, Mike (Moderator)
hi Alex,
could you suggest, if debugging can be used to see the exact missing auth. object, for a user.
i tried setting break point for statement ' AUTHORITY-CHECK', for a user having insufficient auth., but it still showed in green these statements. i understand that setting up breakpoint statement, will
show all such statements, because that is what i set. But my requirement is to see where the missing auth. check is.
regards
Plaban
Thanks, Maheswar and Holger.
We have Office 365 and planning to use SharePoint Online to be able to view some of our BO 4.x reports. We only want to show (only read and not write back) our BO reports to the MS SharePoint Online, Holger.
The way I've understood IOMS, it's only for local MS SharePoint versions. And SharePoint Online is a different story. Kindly correct me if I am wrong, Holger.
Does that mean that we need PowerBI or Layer2 to just show our BO reports in SharePoint Online?
test it and you are right
.
I tested it and there is a check in get_oca_t_table to see if deletion is checked.
I believe you can only get the CR 2013 as a free eval. Why are you looking for CR 2008 which is almost out of support?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter
I am not receiving any more response to my query. Closing the thread.
Yes, you shoud delimit the change if Payroll has already been executed "LIVE". There may be more than 2 ways to go about it, but here are 2 options:
1 - modify your schema by adding Functions IF, ELSE, and ENDIF. Function IF is then associated with a pcr that will query the Payroll Period. If the condition is met, then the next line in the schema will call rule Z013, but if not, it will call rule UO13.
IF ZDED
PRART Z013
ELSE
PRART UO13
ENDIF
2 - replace rule UO13 in your sub-schema by rule Z013, but modify Z013 so that the first operation used is CMPER YYPP (where YY is the last 2 digits of the year and PP is the Payroll Period where the change becomes active. For return value <, the operations will be those of rule UO13, while for return value *, the operations will be those you used in creating Z013 during your tests.
Hi All,
I want to prevent my application from external XSS attack. Especially when user enters a name of the app and description, these are the input fields where there is a chance of cross site scripting ( XSS ) attack. I have tried function encodeURI(). But this is converting external scripting and displaying to the user. I want this to be handled within the code and what user enters should only be visible to the user.
Any help would be appreciated.
Okay ... I started from scratch and only added the datasource as the datatable.
It still printed the PJL code.
I did find what it is, though. It is the ReportTitle. I commented out the line with the reporttitle and it printed properly. When I uncommented the reporttitle, that is when the PJL code printed instead of the report.
Case "OVERVIEW", "OVERVIEWD"
objRpt = New rptOVERVIEW
objRpt.SetDataSource(dsOverview)
objRpt.SummaryInfo.Dispose()
objRpt.SummaryInfo.ReportTitle = "Overview Report" & strReportHeader & vbCrLf & strContactPhone
strReportComments = strVersion
objRpt.SummaryInfo.ReportComments = strReportComments
Can you think of any reason why?
Thanks for all of your input!!
Eddi Rae
To rephrase what Avinash said:
HTH.