Hi Gupta,
Thank you for your help. But it is custom PAI event, I mean, I don't know to write codes to modify the output table. If we can use standard button to realize it?
BR
Jay
Hi Gupta,
Thank you for your help. But it is custom PAI event, I mean, I don't know to write codes to modify the output table. If we can use standard button to realize it?
BR
Jay
Hi Nagarajan,
Thanks for your reply ,its working perfectly,
I want to use this query for specific Item only ,so help me with where i have to declare the item code ( item code is "F00012") in below query
SELECT CASE WHEN $[$38.14.number] * $[$38.11.number] <15 Then 15
ELSE $[$38.14.number] * $[$38.11.number] END
Hi Experts,
We are planing to start the Low value asset,I have configured below mentioned steps in the testing client.
1.New Asset Class
2.New Number range
3.Period control 01/01/01/01 because we have to depriciate immediately(Base Method) and to dispose immediatly(ABUMN).
4.New depr.Key for immediately.
5.LVA amount 3000
User requirement for maintain LVA.Main asset to create with department wise sub asset for department assets.Exp IT is Main asset code 1000-0,Printers,card readers 1000-1,1000-2 etc.. all IT asset will come under sub asset number.Because in this way they can easily get the departmet wise report.
Now i want to do the configuration if the user mistakenly by using LVA main asset number for posting system will not be allow .becuase if he used main asset numeber for capitalization the capitalization will copy to sub asset number.
Anybody can suggest how i can achive above mentioned scenario.
Regards,
Nivas.
Hi Nagarajan,
Thanks for your answer, its working perfectly.
But i want to use this for one item only, So Help with in the query where i have to declare for specific item (Item code "F000012") In below query
SELECT CASE WHEN $[$38.14.number] * $[$38.11.number] <15 Then 15
ELSE $[$38.14.number] * $[$38.11.number] END
Hi,
The problem here is OPS$ user <sid>adm is not able to connect oracle via /@.
Please refer to SAP note 400241.
Whenever you want to change SAP user's password, you have to use brtools as per SAP note
522863 point 7.
Best regards,
James
Hello Sonal,
I am using CBTA SP2 on SOLMAN 7.1 SP12.
I have done the recording for one of the scenario in the SAP Portal 7.30 and it was working fine.
But when I have recorded another scenario on the Portal then after that I have tried to execute this scenario then the values on the subscreen were not filled.
Can you please help me in this case?
Thank you,
Deepanker Mahajan
HI Batish,
What Android device do you have?
If you create a configuration policy for Android in Afaria 7 Service Pack 5, there are several options.
For example, if you have a Samsung SAFE device (Android 4.x and above), and you navigate to WiFi Policy and then add Network Connection Settings, you'll see several parameters including CA certificate, Client certificate and SCEP request
In particular, these parameters are greyed out and can be enabled only selecting EAP as network link security.The CA certificate is used to authenticate the connection by the router while the client certificate is used by the client to authenticate the connection. Finally, the SCEP request works selecting the CA profile you have created in Afaria Administrator console and when the configuration policy is applied to your device, Afaria requests a certificate from your CA and sends it to the device.
Thank you
Hi Sandeep,
What is the suggestion provided by SAP in that information pop up. Please put a screenshot
Regards
Varun M
Hi,
We are facing the same problem. Is someone found a solution ?
Thank you in advance for help.
Jean-Philippe
Hi,
Issue got resolved my self. explained in my blog:
Thanks
Yoonus
The CRUFL can compile but it has problem when to add the assembly to the Global Assembly Cache. My CRUFL can add via Visual Studio Command Prompt. There is response "Assembly successfully added to the cache". I copy this dll file to C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86. My Crystal report file can not see the dll.
Thanks. In my particular case the parent is a sap.ui.layout.Grid
<l:Grid id="teste" defaultSpan="L2 M2 S12"
width="auto">
The strange thing is that it is returning a 1214 width, when in fact the Grid is much smaller, and the chart is being cut in half. Ever use this on a Grid?
The grid is -xmlview1--teste and the chart is the bottom one, but between them you have that highlighted (dynamic) div that is smaller and I can't seem to access it. That one is defined by the L2 span of the grid.
Hi.
at ECC/BE Dev servers table RSLOGSYSMAP need to have respective servers technical details.
Ask basis team they know it.
above table need to have source as ECC Dev technical name
Target as BW Dev technical name.
Just ask basis to team do the logical mappings or run Tx- BDLS.
Thanks
Maintain above table like below.
Original Source System- R3 DEV
Target System -BW Dev
Thanks for reply
Hi,
can you explain which one you want output?
are you using the any rescrticitons on the venders.
-Phani.
dear Vivek, how did you resovlved the problem, check the box on in T code OBY6?
09,
The BOM may have already been exploded.
Best Regards,
DB49
Hi,
I want to create our own tables / forms and complementary that to SAP. Unfortunately,the object registration wizard has only a few options . Is it somehow possible to create own forms like the item form (with tabs/index ?)
Thanks a lot!
Hello Lakshmanan,
I am not sure why you would want to give execute permission to group and others for every file.
In any case, I am assuming you have added the parameter / user settings in your Process Orchestration system. Add the umask setting in /home/<sid>adm/.profile file and restart the PO java system.
Another peculiar thing would be, that the umask functionality works by subtracting the umask value from 777 for directories and 666 for regular files. So I think if you gave umask as 003, you will get 774 for directories that are created and 663 which is weird permission to provide for regular files.
Regards,
Siddhesh