Did you check the message monitor on the SAP backend system side?
Re: Send Message to SAP via RFC but FM Doesn't Exist
↧
↧
Re: CA03 does not show the same data that CA02
Hi. I know who to allocate, my question is what that happened?, Why exists difference between CA02 and CA03, Why, I we saw ca03 the components are located in different operations , and if we saw CA02 components are just located in operation 0010?
↧
Re: Cross docking functionality in SAP F&R
Hi Eduardo,
Thanks for your reply. I have the similar scenario
Herein, we have kept relationship as mentioned below
Article: 100050
Store: FRS4
DC: FRD4
Vendor - TESTVEND1
For Vendor -> DC, we have maintained the distribution profile as FTM (Cross docking) and the RP type for article as 01
For DC -> Store, we have maintained RP type as 11
Now when we have updated the consumption data for both DC & store for the article at DC / store. We ran FRP for both DC (FRD4) and store (FRS4). The order proposal was getting created correctly for store, while no order proposal was created for DC as per the RP type.
Now, how is it being classified as a Cross docking scenario as we expect that the OP (STO's), once their inbound delivery is created, then they should be cumulated in ECC and generated a collective PO for Cross docking. Is that correct. Also, can you please let know the exact process to be followed for the same.
thanks
Best Regards
Prashant
↧
Re: DTP Failure Issue
Yes, we checked the note. But it doesnt look relevent to our system version. We are on BI 7.4.
Thanks,
Govind
↧
Re: External numbering with MDG-S 6.1 Vendor UI
Really appriciate if you send me thread to enable BP_ID
↧
↧
SAPPDFPRINT & SAPSPRINT not using windows default printer selection
Hello,
I have started with installing SAPPDFPRINT to be able to directly print to a windows printer. This was not a real good option because the application has a dialog box that pops up asking the user to select a windows printer to print from even though in SPAD I had told the system to use the default printer ("__DEFAULT"). This options would have worked great if the system bypassed the popup and just used the default printer.
I then found the partner application SAPSPRINT which I know is for print servers but can also be used on work stations. This option will directly print to the windows printer but still does not allow me the option to set the host printer to default. I have to physically set the host printer to a printer that is installed on the machine. This option is not a good option because it would lead to a lot of printers being set in SPAD which are connected to local machines.
My question is:
Is there a way to use either of these applications or some other application to be able to set a host printer in SPAD to default so that I can directly print PDF documents to a windows printer using the users default printer without any dialog popups.
Thanks,
Vinnie T.
↧
Re: LTA Service in Advance Claims!
Hello Radhika,
To add the applications in SICF, please use the note
1768102 - ICF service for WDA application not delivered, Through this you should be able to add.
Best Regards,
Deepak Kumar Sharma
Active Global Support..
↧
Re: ALV GRID showing Blue color column despite making key as space and emphasize as space
I am using the same table the code is for elaboration purpose only
i am using the same fieldcat table ...
↧
C_AUDSEC_731 SAP Certified Technology Associate - SAP Authorization and Auditing for SAP NetWeaver 7.31
Guys,
I am planning to attend C_AUDSEC_731 exam very soon.
Is it possible to share the material information to pass this exam would be great?
Thanks Nair....
↧
↧
Re: Grouping value for column values
Not exact solution but : http://jsbin.com/becimuso/4/edit
↧
table control
Hi group,
I created table control (with wizard) to display custom table data with insert delete buttons, when user wants to add new entry after pressing insert button I need to auto populate code by checking table I need to increase previous value , can any body suggest where I can write this logic.
also when i am pressing insert button its allowing me to write on the first row for example above ACC1 record , but I want to add records below ACC3 can any body suggest
| Customer | Code | amount | count |
| ACC1 | 298 | 1000 | 1 |
| ACC2 | 300 | 3000 | 4 |
| ACC3 | 500 | 600 | 8 |
↧
Re: Load Bookmark automatically
Hi All,
Tammy Powlas ,Michael Howles , Karol Kalisz , Jeroen van der A , David Gyurasz
Can I have your suggestions here on this.
Thanks,
Sara
↧
Re: This is my first day so I'm green (very new) to SAP. So far I love what I'm learning but...
Thank u
ilive been so busy taking three open sap courses so that im familiar with what sap is
I started out looking at function side the. so I'm trying to get a grasp of that I've done some work on a server but not extensive. I'm heading to the websites you Suggested now. Was on hub but it was quite confusing but im going to follow your suggestion
↧
↧
Re: The Page can't be displayed
Hi Urstruly,
How to find the Port is valid or not ?
Go to the ABAP stack and execute de transaction sxmb_ifr, it redirects to the main page with the port necessary,
You can get a valid URL from the sender agreement or via Service registry (Check tihs blog Publish services from PI 7.1 to the Service Registry.)
http://xxxx.xxxx.com:50000/sap/xi/engine?type=entry
This URL should be used to call the ABAP Engine directly via http. You would need to activate the service:
:
But i think you have developed a sender SOAP scenario, isn it?
Regards.
↧
Re: Strange behaviour: DELFOR01-IDoc fails with IDOC_ERROR_PARSE_FAILURE on prod - But working on test system
I found the solution. The field CRETIM had the wrong format. I have corrected the mapping and know it is working. Still I'm a little bit confused why it was working this way on our test system...
↧
Re: New Processes in Plant Maintenance
Neal,
Attached in the form of picture format . Read Sequence picture 1,2,3. Hope you will be able to view.
Regards
KJogeswaraRao
↧
Issues connecting via HCI(Hana Cloud Integration)
Hi All,
Please note that we are facing some issues in connection of Cloud for Customer and SAP ERP via HCI since the latest upgrade.
When we are trying to send some data from Cloud to ERP via HCI , getting the below error:
=====================================
https://iflmaptr103h0108avtaiot-h0108.intaas.hana.ondemand.com/cxf/COD/ERP/BP_MASTER_REPLICATION failed with message "[CXF][General][Exception]:Could not send Message.", caused by "EOFException:SSL peer shut down incorrectly”
=====================================
When trying to send some data from ERP to Cloud via HCI, getting below error in SMICM:
====================================
====================================
All outbound RFC connections from ERP to HCI are failing to connect with error “ HTTPIO_PLG_CANCELED”.
Can anyone give any insight on the above.
Thanks,
Suvankar Chatterjee
HI Hi
↧
↧
Re: How do you update Freehand SQL Script in a Dataset once it's initially entered?
Thanks for linking me to the Idea - I have voted now also. Appreciate the follow up.
↧
Deploy Strategy in SAP SSM
Hi to all
I have the following inquiry: Can I in SAP SSM deploy the strategy in a Top-Down perspective? , that is from C-level executives to front-line employees? AND at the same time, integrate this KPI's with Sucess Factors to measure the performance of each employee?
Thank you very much
Dario R
↧
Re: short dump DBSQL_STMNT_TOO_LARGE
one more detailed screenshot 
↧
More Pages to Explore .....
